Tractor-Size › Deutz-Fahr › 3050
Deutz-Fahr

Deutz-Fahr 3050 tire size

Factory tire pairs for the Deutz-Fahr 3050 (51 HP, 4WD):

  • 51 HP
  • 4WD
Rear320/70R20Front200/70R16
4WD
Rear
320/70R20
Outside dia.
983mm
Width
319mm
Rim
20″
No bias-ply equivalent
Front
200/70R16
Outside dia.
691mm
Width
197mm
Rim
16″
No bias-ply equivalent

The tires on the tractor may not be original. A different size from the factory one can damage the transmission, especially on 4WD.

What do the Deutz-Fahr 3050 tyre sizes mean?

320/70R20 is a radial tyre: section width 320 mm, sidewall height 70% of the width, rim diameter 20 inches. The “R” marks radial construction. Outside diameter is about 983 mm.

200/70R16 is a radial tyre: section width 200 mm, sidewall height 70% of the width, rim diameter 16 inches. The “R” marks radial construction. Outside diameter is about 691 mm.

In this pair the rear tyre's outside diameter is about 1.42 times the front. On 4WD tractors the front-to-rear tyre ratio must match the driveline ratio, so keep it when changing tyres.

3 other Deutz-Fahr models use the same rear size (320/70R20).

Read more: How to read a tyre size · 4WD front–rear tyre ratio · Tractor tyre pressure

Related guides

Take it to your tire shop: tractor-size.com

4WD ratio check and other tools →

Source: Deutz-Fahr TR Seri 3 Stage V broşürü

FAQ

What is the front tire size of the Deutz-Fahr 3050?

The Deutz-Fahr 3050 comes from the factory with 200/70R16 front tires.

What is the rear tire size of the Deutz-Fahr 3050?

The Deutz-Fahr 3050 comes from the factory with 320/70R20 rear tires.

Can I fit a different tire size on the Deutz-Fahr 3050?

Equivalent sizes with a very close outside diameter can be fitted (e.g. the radial equivalent). On 4WD, a changed front/rear ratio can damage the driveline, so check it with the 4WD ratio tool first.

Other Deutz-Fahr models

All makes

⚠️ Is this size wrong? Report it
Was this useful?Can't find your model or size? Tell us and we'll add it →