Tractor-Size › John Deere › 2941
John Deere

John Deere 2941 tire size

Factory tire pairs for the John Deere 2941 (95 HP, ?):

  • 95 HP
Rear13.6-36Front5.00-15
Rear
13.6-36
Outside dia.
1,515mm
Width
345mm
Rim
36″
radial equivalent: 340/85R36 (13.6R36)
340/85R36
Outside dia.
1,492mm
Width
343mm
Rim
36″
Original bias-ply: 13.6-36 · 13.6R36
Front
5.00-15
Outside dia.
≈635mm
Width
127mm
Rim
15″
No radial equivalent

The tires on the tractor may not be original. A different size from the factory one can damage the transmission, especially on 4WD.

What do the John Deere 2941 tyre sizes mean?

13.6-36 is an inch-sized tyre: section width about 13.6 inches, rim diameter 36 inches. The dash (-) marks bias (cross-ply) construction. Outside diameter is about 1,515 mm.

5.00-15 is an inch-sized tyre: section width about 5.00 inches, rim diameter 15 inches. The dash (-) marks bias (cross-ply) construction.

3 other John Deere models use the same rear size (13.6-36).

Read more: How to read a tyre size · 4WD front–rear tyre ratio · Tractor tyre pressure

Related guides

Take it to your tire shop: tractor-size.com

4WD ratio check and other tools →

Source: tractorcharts.com

FAQ

What is the front tire size of the John Deere 2941?

The John Deere 2941 comes from the factory with 5.00-15 front tires.

What is the rear tire size of the John Deere 2941?

The John Deere 2941 comes from the factory with 13.6-36 rear tires.

Can I fit a different tire size on the John Deere 2941?

Equivalent sizes with a very close outside diameter can be fitted (e.g. the radial equivalent). On 4WD, a changed front/rear ratio can damage the driveline, so check it with the 4WD ratio tool first.

Other John Deere models

All makes

⚠️ Is this size wrong? Report it
Was this useful?Can't find your model or size? Tell us and we'll add it →