Tractor-Size › John Deere › 3036EN
John Deere

John Deere 3036EN tire size

Factory tire pairs for the John Deere 3036EN (35 HP, 4WD):

  • 35 HP
  • 4WD
Rear8.3-24Front180/85-12
4WD
Rear
8.3-24
Outside dia.
995mm
Width
211mm
Rim
24″
No radial equivalent
Front
180/85-12
Outside dia.
≈611mm
Width
180mm
Rim
12″
No radial equivalent
4WD
Rear
280/85R20
Outside dia.
989mm
Width
282mm
Rim
20″
No bias-ply equivalent
Front
200/70R16
Outside dia.
691mm
Width
197mm
Rim
16″
No bias-ply equivalent

The tires on the tractor may not be original. A different size from the factory one can damage the transmission, especially on 4WD.

What do the John Deere 3036EN tyre sizes mean?

8.3-24 is an inch-sized tyre: section width about 8.3 inches, rim diameter 24 inches. The dash (-) marks bias (cross-ply) construction. Outside diameter is about 995 mm.

280/85R20 is a radial tyre: section width 280 mm, sidewall height 85% of the width, rim diameter 20 inches. The “R” marks radial construction. Outside diameter is about 989 mm.

200/70R16 is a radial tyre: section width 200 mm, sidewall height 70% of the width, rim diameter 16 inches. The “R” marks radial construction. Outside diameter is about 691 mm.

In this pair the rear tyre's outside diameter is about 1.43 times the front. On 4WD tractors the front-to-rear tyre ratio must match the driveline ratio, so keep it when changing tyres.

1 other John Deere models use the same rear size (8.3-24).

Read more: How to read a tyre size · 4WD front–rear tyre ratio · Tractor tyre pressure

Related guides

Take it to your tire shop: tractor-size.com

4WD ratio check and other tools →

Source: deere.co.in

FAQ

What is the front tire size of the John Deere 3036EN?

The John Deere 3036EN comes from the factory with 180/85-12 or 200/70R16 front tires.

What is the rear tire size of the John Deere 3036EN?

The John Deere 3036EN comes from the factory with 8.3-24 or 280/85R20 rear tires.

Can I fit a different tire size on the John Deere 3036EN?

Equivalent sizes with a very close outside diameter can be fitted (e.g. the radial equivalent). On 4WD, a changed front/rear ratio can damage the driveline, so check it with the 4WD ratio tool first.

Other John Deere models

All makes

⚠️ Is this size wrong? Report it
Was this useful?Can't find your model or size? Tell us and we'll add it →