Tractor-Size › John Deere › 8120
John Deere

John Deere 8120 tire size

Factory tire pairs for the John Deere 8120 (208 HP, 4WD):

  • 208 HP
  • 4WD
Rear480/80R46Front11.00-24
4WD
Rear
480/80R46
Outside dia.
1,952mm
Width
479mm
Rim
46″
No bias-ply equivalent
Front
11.00-24
Outside dia.
≈1,168mm
Width
279mm
Rim
24″
No radial equivalent

The tires on the tractor may not be original. A different size from the factory one can damage the transmission, especially on 4WD.

What do the John Deere 8120 tyre sizes mean?

480/80R46 is a radial tyre: section width 480 mm, sidewall height 80% of the width, rim diameter 46 inches. The “R” marks radial construction. Outside diameter is about 1,952 mm.

11.00-24 is an inch-sized tyre: section width about 11.00 inches, rim diameter 24 inches. The dash (-) marks bias (cross-ply) construction.

23 other John Deere models use the same rear size (480/80R46).

Read more: How to read a tyre size · 4WD front–rear tyre ratio · Tractor tyre pressure

Related guides

Take it to your tire shop: tractor-size.com

4WD ratio check and other tools →

Source: machinerylink.com

FAQ

What is the front tire size of the John Deere 8120?

The John Deere 8120 comes from the factory with 11.00-24 front tires.

What is the rear tire size of the John Deere 8120?

The John Deere 8120 comes from the factory with 480/80R46 rear tires.

Can I fit a different tire size on the John Deere 8120?

Equivalent sizes with a very close outside diameter can be fitted (e.g. the radial equivalent). On 4WD, a changed front/rear ratio can damage the driveline, so check it with the 4WD ratio tool first.

Other John Deere models

All makes

⚠️ Is this size wrong? Report it
Was this useful?Can't find your model or size? Tell us and we'll add it →