Tractor-Size › Massey Ferguson › MF 260 4WD
Massey Ferguson

Massey Ferguson MF 260 4WD tire size

Factory tire pairs for the Massey Ferguson MF 260 4WD (60 HP, 4WD):

  • 60 HP
  • 4WD
Rear12.4-28Front6.00-16
Rear
12.4-28
Outside dia.
1,260mm
Width
315mm
Rim
28″
radial equivalent: 320/85R28 (12.4R28)
320/85R28
Outside dia.
1,255mm
Width
319mm
Rim
28″
Original bias-ply: 12.4-28 · 12.4R28
Front
6.00-16
Outside dia.
735mm
Width
165mm
Rim
16″
No radial equivalent

The tires on the tractor may not be original. A different size from the factory one can damage the transmission, especially on 4WD.

What do the Massey Ferguson MF 260 4WD tyre sizes mean?

12.4-28 is an inch-sized tyre: section width about 12.4 inches, rim diameter 28 inches. The dash (-) marks bias (cross-ply) construction. Outside diameter is about 1,260 mm.

6.00-16 is an inch-sized tyre: section width about 6.00 inches, rim diameter 16 inches. The dash (-) marks bias (cross-ply) construction. Outside diameter is about 735 mm.

33 other Massey Ferguson models use the same rear size (12.4-28).

Read more: How to read a tyre size · 4WD front–rear tyre ratio · Tractor tyre pressure

Related guides

Also written as: Massey Ferguson MF2604WD · Massey Ferguson MF-260-4WD

Take it to your tire shop: tractor-size.com

4WD ratio check and other tools →

Source: constructionequipmentguide.com

FAQ

What is the front tire size of the Massey Ferguson MF 260 4WD?

The Massey Ferguson MF 260 4WD comes from the factory with 6.00-16 front tires.

What is the rear tire size of the Massey Ferguson MF 260 4WD?

The Massey Ferguson MF 260 4WD comes from the factory with 12.4-28 rear tires.

Can I fit a different tire size on the Massey Ferguson MF 260 4WD?

Equivalent sizes with a very close outside diameter can be fitted (e.g. the radial equivalent). On 4WD, a changed front/rear ratio can damage the driveline, so check it with the 4WD ratio tool first.

Other Massey Ferguson models

All makes

⚠️ Is this size wrong? Report it
Was this useful?Can't find your model or size? Tell us and we'll add it →