Tractor-Size › Universal › 550 DT
Universal

Universal 550 DT tire size

Factory tire pairs for the Universal 550 DT (55 HP, 4WD):

  • 55 HP
  • 4WD
Rear18.4-28Front7.50-16
Rear
18.4-28
Outside dia.
≈1,506mm
Width
467mm
Rim
28″
No radial equivalent
Front
7.50-16
Outside dia.
805mm
Width
205mm
Rim
16″
No radial equivalent

The tires on the tractor may not be original. A different size from the factory one can damage the transmission, especially on 4WD.

What do the Universal 550 DT tyre sizes mean?

18.4-28 is an inch-sized tyre: section width about 18.4 inches, rim diameter 28 inches. The dash (-) marks bias (cross-ply) construction.

7.50-16 is an inch-sized tyre: section width about 7.50 inches, rim diameter 16 inches. The dash (-) marks bias (cross-ply) construction. Outside diameter is about 805 mm.

9 other Universal models use the same rear size (18.4-28).

Read more: How to read a tyre size · 4WD front–rear tyre ratio · Tractor tyre pressure

Related guides

Also written as: Universal 550DT · Universal 550-DT

Take it to your tire shop: tractor-size.com

4WD ratio check and other tools →

Source: machinerylink.com

FAQ

What is the front tire size of the Universal 550 DT?

The Universal 550 DT comes from the factory with 7.50-16 front tires.

What is the rear tire size of the Universal 550 DT?

The Universal 550 DT comes from the factory with 18.4-28 rear tires.

Can I fit a different tire size on the Universal 550 DT?

Equivalent sizes with a very close outside diameter can be fitted (e.g. the radial equivalent). On 4WD, a changed front/rear ratio can damage the driveline, so check it with the 4WD ratio tool first.

Other Universal models

All makes

⚠️ Is this size wrong? Report it
Was this useful?Can't find your model or size? Tell us and we'll add it →