Tractor-Size › Guides

Narrow tires for orchard and row-crop tractors

What to watch when choosing narrow tires for vineyards, orchards and row-crop work: track width, ratio and factory pairs.

In short
  • Measure row spacing and track width first.
  • The narrow tyre's diameter should match the factory tyre.
  • On 4WD keep the front–rear ratio.
  • A narrow track raises rollover risk on slopes.

Vineyards, orchards and row-crop hoeing require the tractor to fit between rows. Wide tires damage plants, compact the soil and make turns harder, so narrow tires are preferred. But picking a tire just because it is narrow can cause real problems, especially on a 4WD tractor.

Measure the track width first

Besides tire width, the track width (outside to outside of the left and right tires) must fit the row spacing with room to spare. Many tractors can change track width by reversing wheel centres or with adjustable rims; check this before changing tires.

Narrower, same outside diameter

The goal is to reduce width while keeping the outside diameter. If the diameter drops a lot, ground clearance falls, the speedometer reads wrong and the 4WD ratio changes.

The 4WD ratio

When narrowing the rear on a 4WD tractor, the front must match. The front/rear diameter ratio should stay close to a factory pair; see front/rear ratio on 4WD tractors.

How to check on the site

When you select your tractor, a “Narrow tire options” section lists narrower sizes with a rolling circumference close to the factory pair. These are calculated suggestions, not factory approvals; a rim change may be needed. The “Row spacing” tool helps you check which tire width fits your rows.

Tips

Check the size on your current sidewall and the rim width before switching.

Pros and cons of narrow tyres

Consider slope and soil before switching.

Rim width

A narrower tyre may need a narrower rim. Check the tyre maker's recommended and permitted rim widths before fitting.

Changing tyres by season

Some farmers use two sets of tyres, one for orchard work and one for the field. Both sets must follow the same ratio rules. When swapping sets, recheck wheel nut torque and tyre pressure.

Frequently asked questions

What should I check before fitting narrow tyres?

Rim diameter, outside diameter and track width. The new outside diameter should be close to the factory tyre and the track should match row spacing.

Do narrow tyres reduce traction?

They can, slightly, because the footprint is smaller. The effect depends on soil and use.

Do I need new rims for narrow tyres?

Sometimes. Check the maker's recommended rim width; if your rim isn't listed you may need another.

What matters on a 4WD orchard tractor?

Keep the front–rear ratio. When narrowing both axles, choose a pair close to a factory pair.

Will narrow tyres change my speedometer?

If the new outside diameter differs from the factory tyre, displayed speed and distance will differ slightly. Choosing a diameter close to the original keeps the difference small.

Published: 2026-10-20 · Updated: 2026-11-13

Guides

Was this useful?Can't find your model or size? Tell us and we'll add it →