Tractor-Size › Guides

Radial vs bias tractor tyres

How to tell radial (R) and bias (-) tyres apart, when each makes sense, and whether they can be mixed.

In short
  • R in the size means radial; a dash means bias.
  • Radial wins on traction and life, bias on price.
  • Never mix them on one axle.
  • When switching, check the equivalent's outside diameter.

One of the first choices when buying a tractor tyre is whether it is radial or bias (cross-ply). They look similar from outside, but their construction and field behaviour differ. The right choice depends on how much field versus road work the tractor does, and on budget.

How to tell from the sidewall

The size itself tells you. A size like 520/85R38 with an “R” is radial. A size like 18.4-38 with a dash, or no letter, is bias. Bias tyres usually show a ply rating (e.g. 12 PR); radial tyres show a load index and speed symbol (e.g. 146A8).

Construction

In a bias tyre the carcass plies cross each other diagonally, so sidewall and tread work as one stiff body. In a radial tyre the carcass cords run straight from bead to bead, with separate belts under the tread. The sidewall can flex while the tread stays flat, giving a larger footprint.

Radial advantages

Bias advantages

Can they be mixed?

Never mix radial and bias tyres on the same axle; their rolling circumference and flex differ. On 4WD tractors the front-to-rear ratio also matters, and mixing constructions between axles can stress the driveline when front drive is engaged. Keeping all four tyres the same construction is the safest approach. See the 4WD front–rear tyre ratio guide.

Converting sizes

When moving from a bias size to a radial one (e.g. 18.4-38 to 520/85R38), manufacturers publish equivalence tables. The replacement must have a similar outside diameter and width and must clear fenders and frame. Tractor-Size shows your model’s factory size; always confirm the outside diameter with your dealer before switching.

Think long-term cost

Radials usually cost more to buy, but on a tractor that works many hours a year, less slip, less fuel and longer tread life can recover the difference. On a lightly used tractor the lower price of bias tyres may be more attractive.

Pressure and handling differences

Radials are designed to run at low pressure, so their sidewalls look soft; this is normal. Over-inflating because of that look removes the radial's advantages. Bias tyres have stiff sidewalls and usually run at higher pressure. For both, take pressure from the maker's table.

Frequently asked questions

How can I tell a radial from the size?

An R in the size (e.g. 520/85R38) means radial; a dash (e.g. 18.4-38) means bias.

Is radial always better?

It usually wins on traction, soil protection and life, but bias can make sense on stony ground and lightly used tractors.

Can radial and bias be used together?

Not on the same axle, and mixing constructions between axles on 4WD is not recommended.

What should I check when switching to radial?

Outside diameter and width of the equivalent size, fender clearance, rim fit and the 4WD ratio.

Published: 2026-10-24 · Updated: 2026-11-13

Guides

Was this useful?Can't find your model or size? Tell us and we'll add it →