What is tractor track width and how is it adjusted?
Why track width matters, setting it for row crops, and adjusting it with rims and hubs.
- Track is the distance between tyre centres.
- In row crops the track must match row spacing.
- Adjust by reversing rims, rim position or sliding hubs.
- Afterwards check nut torque and tread direction.
Track width is the distance between the centres of the two tyres on an axle. Stability against rollover, working between crop rows without damage and traction all depend on it.
Why it matters
- Row crops: In beet, maize or sunflower the tyres must run between rows. If track width doesn't match row spacing, tyres crush plants.
- Stability: A wide track is steadier on slopes; a narrow track helps in vineyards, orchards and tight spaces.
- Front–rear match: Similar front and rear tracks let the rears follow the fronts' path, reducing compaction.
How to change it
- Reversing the rim: Many rims are offset; mounting them the other way widens or narrows the track.
- Rim–disc position: Some wheels let the rim be bolted to the centre disc in several positions, each giving a different track.
- Sliding hubs: Some tractors allow stepless adjustment by sliding the wheel along the axle shaft.
- Front axle: 2WD front axles often use telescopic arms; 4WD fronts are adjusted via the wheels.
The operator's manual lists the possible settings and the track each one gives.
Cautions
- Torque wheel nuts to the maker's value after adjusting and recheck after first use.
- The tread's V pattern must still point in the direction of travel; reversing rims may mean swapping tyres left to right.
- A very narrow track raises rollover risk on slopes.
See also narrow orchard tyres and the row-spacing tool on the home page.
Measure before adjusting
Before changing track width, measure row spacing and the current track, centre to centre of the tyres. The aim is for tyres to run in the middle of the inter-row. Measuring from tracks on the ground makes it easier.
Match front and rear tracks
When changing the rear track, check the front as well. Similar tracks let the rears follow the fronts, reducing compaction and crop damage between rows. The front axle's adjustment limits and their effect on steering lock are in the operator's manual. After adjusting, take a short test drive and make sure tyres don't touch fenders or frame.
Frequently asked questions
What is track width?
The distance between the centres of the two tyres on an axle.
How is track width changed?
By reversing the rim, changing the rim–disc position or using sliding hubs, as listed in the operator's manual.
Does reversing the rim change tyre direction?
It can; you may need to swap tyres left to right so the tread points forward.
Is a narrow track dangerous?
On slopes it raises rollover risk. Choose the track to suit the ground.
Does track width affect traction?
Track width mainly affects stability and where the tyres run; traction depends more on tyres, ballast and pressure.
Can I adjust track width myself?
It can be done following the manual, but heavy wheels need proper lifting equipment. If unsure, use a workshop.
Does changing track change tyre pressure?
Not by itself, but if load distribution changes, recheck pressure against the maker's table.
Published: 2026-11-04 · Updated: 2026-11-13
Guides
- How to read a tractor tire size
- Radial vs bias-ply tractor tires
- Front/rear tire ratio on 4WD tractors
- What pressure should tractor tires run at?
- What do the markings on a tractor tire sidewall mean?
- How to choose tires for a tractor trailer
- Narrow tires for orchard and row-crop tractors
- How to make tractor tires last longer
- When should tractor tires be replaced?
- Tractor ballast: weights and liquid ballast
- Radial vs bias tractor tyres
- Tractor tyre tread codes: R-1, R-1W, R-2, R-3, R-4, F-2, I-1
- Rim width and tyre fitment
- How to store tractor tyres and prepare for winter
- What to do when a tractor tyre goes flat
- Load index and speed symbol on tractor tyres
- How to tell a tyre's age (DOT code)
- Why do tractor front tyres wear fast?
- What to check when buying tractor tyres