What do the markings on a tractor tire sidewall mean?
Load index, speed symbol, TL/TT, PR, IF/VF, rotation arrow and date code: learn to read a tractor tire sidewall.
- The sidewall shows size, construction, load and speed.
- The rotation arrow shows how to fit the tyre.
- TL means tubeless, TT tube type.
- The end of the DOT code is the manufacture date.
Besides the size, a tractor tire sidewall carries several markings. They tell you how much load the tire carries, how fast it can go, whether it needs a tube and when it was made.
Load index and speed symbol: 141A8 / 138B
Radial tires usually show a code like 141A8. The number is the load index (each value maps to a load in kg, e.g. 141 ≈ 2,575 kg). The letter-digit is the speed symbol: A6 = 30 km/h, A8 = 40 km/h, B = 50 km/h, D = 65 km/h. Dual markings (e.g. 141A8 / 138B) mean the tire carries a little less load at the higher speed.
Ply rating: 8PR, 12PR
Bias tires usually express strength as PR (ply rating). It is a strength index, not a literal count of plies. In the same size, a higher PR carries more load and takes more pressure.
TL and TT
- TL (tubeless): holds air on a suitable rim without a tube.
- TT (tube type): must be fitted with an inner tube.
IF and VF
IF (Increased Flexion) and VF (Very High Flexion) radials carry the same load at lower pressure than a standard tire, reducing soil compaction.
Rotation arrow
Field tire treads are directional. The arrow shows which way the tire should turn when driving forward. Mounted backwards, the tire loses traction, does not clean itself and wears unevenly.
Date code
A four-digit code (e.g. 2324) gives the week and year of manufacture: week 23 of 2024. Tires that sat in storage for years can crack from rubber ageing even when unused.
Other markings
- R-1, R-1W, R-2: tread types for general field use, deeper tread, and rice/very wet fields.
- F-2, F-3: front steering tread types.
- I-1, I-3: implement and trailer tread types.
If unsure about a size, photograph the sidewall and send it to your tire shop. See also how to read a tractor tire size.
Reading markings safely
Clean the sidewall before reading it; mud and dust easily hide small digits. Some markings, especially the date code, may be on one side only, so check both sidewalls. If a marking is worn away, the operator's manual or the tyre maker's catalogue will show what the tyre should carry.
What the markings tell you
Reading sidewall markings matters for correct use as well as choice. The load and speed marking tells you how fast the tyre may safely run on the road, and the rotation arrow shows whether it is fitted correctly.
Frequently asked questions
What information is on a tyre sidewall?
Size, construction (radial/bias), load index and speed symbol or ply rating, tubeless/TT, rotation arrow and the DOT date code are the most common.
Why does the rotation arrow matter?
Farm tread is designed to work in one direction. A tyre fitted backwards loses traction and wears faster.
What do TL and TT mean?
TL is tubeless, TT is tube type. A TT tyre must always run with an inner tube.
Where do I find the manufacture date?
The last four digits of the DOT code give the week and year. See the tyre age guide for details.
Published: 2026-10-20 · Updated: 2026-11-13
Guides
- How to read a tractor tire size
- Radial vs bias-ply tractor tires
- Front/rear tire ratio on 4WD tractors
- What pressure should tractor tires run at?
- How to choose tires for a tractor trailer
- Narrow tires for orchard and row-crop tractors
- How to make tractor tires last longer
- When should tractor tires be replaced?
- Tractor ballast: weights and liquid ballast
- Radial vs bias tractor tyres
- Tractor tyre tread codes: R-1, R-1W, R-2, R-3, R-4, F-2, I-1
- Rim width and tyre fitment
- How to store tractor tyres and prepare for winter
- What to do when a tractor tyre goes flat
- Load index and speed symbol on tractor tyres
- How to tell a tyre's age (DOT code)
- Why do tractor front tyres wear fast?
- What is tractor track width and how is it adjusted?
- What to check when buying tractor tyres