Load index and speed symbol on tractor tyres
What do markings like 146A8 or 149D mean? How to read load index, speed symbol and ply rating.
- The load index is a code, not kilograms.
- The speed symbol is the maximum sustained speed.
- Bias tyres usually state capacity as PR.
- A new tyre's load index shouldn't be lower than the factory tyre's.
Next to the size on a radial tractor tyre you will find a marking such as 146A8 or 149D. The number is the load index and the letter (plus digit) is the speed symbol. Reading both correctly is essential for choosing and using tyres safely.
Load index
The load index is a code for the maximum load a single tyre can carry at the stated speed and recommended pressure. The number is not kilograms; each value maps to a standard table. Higher means more capacity. For example, 140 corresponds to roughly 2,500 kg and 150 to roughly 3,350 kg.
Some tyres show two indices (e.g. 146A8/146B or 149A8/146D), meaning different loads at different speeds: more at low speed, less at high speed.
Speed symbol
Common agricultural speed symbols:
- A2: 10 km/h
- A6: 30 km/h
- A8: 40 km/h
- B: 50 km/h
- D: 65 km/h
The speed symbol is the maximum sustained speed at that load index. The tractor's road speed should not exceed it.
Ply rating (PR)
Bias tyres usually state capacity with a ply rating (e.g. 8 PR, 12 PR) instead of a load index. Today PR is a strength class, not an actual ply count. In the same size, a higher PR carries more load but usually needs more pressure.
When replacing tyres
- The new tyre's load index should not be lower than the factory tyre's.
- The speed symbol must suit the tractor's top road speed.
- With a front loader, front tyre load capacity matters especially.
- Always set pressure from the maker's load–pressure table.
See also sidewall markings and tractor tyre pressure.
Link with pressure
The load index is the maximum load at a given pressure. If pressure is low the tyre can't safely carry that load, so with heavy loads and high speed follow the maker's load–pressure table. Running at a pressure or load not in the table can damage the tyre.
Front loaders and heavy implements
With a front loader or a heavy rear implement, the load on tyres can exceed factory values. Check whether the load index covers the extra load. Some makers give separate pressures for loader work; consult the tyre catalogue and the operator's manual for exact figures.
Frequently asked questions
What does 146A8 mean?
146 is the load index and A8 the speed symbol (40 km/h): at that speed and recommended pressure the tyre carries the load matching index 146.
Is the load index in kilograms?
No. It is a code; each number maps to a kilogram value in a standard table.
Can I fit a tyre with a lower load index?
Not recommended. It may not safely carry the load the factory tyre was rated for.
What do bias tyres show instead?
Usually a ply rating (PR). For exact loads check the tyre maker's catalogue.
Published: 2026-11-04 · Updated: 2026-11-13
Guides
- How to read a tractor tire size
- Radial vs bias-ply tractor tires
- Front/rear tire ratio on 4WD tractors
- What pressure should tractor tires run at?
- What do the markings on a tractor tire sidewall mean?
- How to choose tires for a tractor trailer
- Narrow tires for orchard and row-crop tractors
- How to make tractor tires last longer
- When should tractor tires be replaced?
- Tractor ballast: weights and liquid ballast
- Radial vs bias tractor tyres
- Tractor tyre tread codes: R-1, R-1W, R-2, R-3, R-4, F-2, I-1
- Rim width and tyre fitment
- How to store tractor tyres and prepare for winter
- What to do when a tractor tyre goes flat
- How to tell a tyre's age (DOT code)
- Why do tractor front tyres wear fast?
- What is tractor track width and how is it adjusted?
- What to check when buying tractor tyres