Tractor-Size › Guides

How to choose tires for a tractor trailer

Trailer tire size, ply rating, load index and speed: picking the right tire for the load your trailer carries.

In short
  • First work out the trailer's maximum load.
  • Divide it by the number of axles and tyres.
  • PR or load index must cover that load.
  • For road use the speed symbol matters.

A trailer tire does a different job from a tractor tire: it does not pull, it carries load. So the key question is “how many tonnes, at what speed?”. A wrong choice risks blowouts and makes the trailer unsafe on the road.

Start with the load

The total is trailer body weight + payload, shared between the tires. On a single-axle (2-tire) trailer part of the load rests on the tractor hitch; on a 4-tire trailer it is spread over four tires. The combined capacity of the tires should comfortably exceed the loaded trailer weight. Dense loads like grain and especially sand or soil are the hardest on tires.

Ply rating and load index

The same trailer size may come in 10, 12 or 14 PR. Higher ply means more load and more pressure. Using a low-ply tire under a heavy load leads to early sidewall failure.

Speed matters

Capacity depends on speed. Manufacturers usually give more load at low speed (e.g. 10 km/h) and less at road speed (e.g. 40 km/h). For fast road trips use the road-speed value.

Check it on the site

In the home-page visualizer pick your tractor, then “Attach at rear → Trailer”. Choose the tire size, 2 or 4 tires and the load type. The site shows the approximate maximum the trailer can carry for each ply rating and suggests a stronger option if the load is too heavy.

Tips

Calculated values are approximate. Never exceed the trailer's registered maximum weight.

Single or tandem axle?

Axle count directly affects tyre choice. On a single-axle trailer the load is shared by two tyres; on a tandem by four. Carrying the same load, the single-axle trailer needs tyres with higher capacity. The load passed through the drawbar to the tractor must also be considered.

Matching tyres on one axle

Tyres on the same axle should be the same size, construction and similar wear. Mixing sizes makes one tyre carry more than its share and wears it out quickly.

Trailers used on the road

If the trailer often travels long distances on the road, the speed symbol becomes even more important. Running loaded at high speed heats the tyre and speeds up wear. Checking pressure before trips and spreading the load evenly improves safety.

Frequently asked questions

Why does ply rating matter on trailer tyres?

PR is the strength class of a bias tyre; in the same size a higher PR carries more load. Pick a PR suited to the trailer's maximum load.

Can tractor tyres be used on a trailer?

Not recommended. Tractor tyres are built for traction; trailer wheels roll freely and rib (I-1) or trailer-pattern tyres suit them better.

How is trailer tyre pressure set?

From the tyre maker's load–pressure table, for the maximum load and speed. More load needs more pressure.

Is replacing a single tyre a problem?

Tyres on one axle should match in size and wear. If the difference is large, replace both.

Published: 2026-10-20 · Updated: 2026-11-13

Guides

Was this useful?Can't find your model or size? Tell us and we'll add it →